Philips CH1 CRT Television User Manual


 
3135-125-21331 10/09/02 DFU LO1-2K2 CH1, HC, OCC, PC, PL, TL
4
CURRENT MODE COMMERCIAL / CONSUMER
CONSUMER MODE: PRESS 1
COMMERCIAL MODE: PRESS 2
EXIT WITHOUT CHANGING MODES: PRESS 0
To change the operational mode of the Philips Institutional TV, use the RG4172BK or RC2573GR in setup mode (press
TV SETUP on the RG4172BK), and enter the following keystroke sequence: 0 2 4 9 9 5 Menu. Select the desired mode
from the Operational Mode menu.
IMPORTANT NOTE: IF YOU CHANGE THE OPERATIONAL MODE TO CONSUMER
MODE, YOU MUST POWER THE TELEVISION OFF AND BACK ON TO COMPLETE THE MODE CHANGE.
NOTE: ONCE THE
TELEVISION IS IN CONSUMER MODE, DO NOT USE THE SETUP REMOTE TO ACTIVATE COM-
MERCIAL FEATURES. OTHERWISE, THE COMMERCIAL FEATURES WILL AFFECT CONSUMER OPERATION. IT WILL
THEN
BE NECESSARY TO
PLACE THE TELEVISION BACK
INTO COMMERCIAL MODE, THEN INTO CONSUMER MODE,
AND
THEN POWERED OFF AGAIN
TO PROPERLY PLACE THE TELEVISION BACK INTO CONSUMER MODE.
RC2524BK
Guest Remote
29-button guest remote
with menu button, addi-
tional features (VCR con-
trol, etc.)
RL9820B
Guest Remote
20-button guest remote.
RG4172BK
Setup Remote
Master setup remote.
Required to change
operational modes and
access Institutional fea-
tures. Press TV SETUP
to place remote in
SETUP mode.
The following remote controls (optional accessories) can be used with Philips Institutional televisions. This list is by no
means all-inclusive. Other Philips and third-party remote controls not listed here may also be compatible.
SETTING
THE INSTITUTIONAL
TV O
PERATIONAL MODE
RC2573GR
Setup Remote
Future version of master
setup remote. Fully
functionally equivalent
to RG4172BK. Place
switch in SETUP posi-
tion to place remote in
setup mode.
P
HILIPS INSTITUTIONAL TV R
EMOTE CONTROLS