Filter
Top Products
63
RQT8361
You can restart auto channel setting if set up (
➡
17) fails for some reason.
After performing steps 1–4 (➡ 62)
5 Press [3, 4] to select “Auto-Setup
Restart” and press [ENTER].
The confirmation screen appears.
6 Press [2, 1] to select “Yes” and
press [ENTER].
[For]Australia]and]N.Z.]
≥If the country setting menu appears on the television
Press [3, 4] to select the country and press [ENTER].
You can also use the following method to restart Auto-Setup.
When the unit is on and stopped
Press and hold [X CH] and [CH W] on the main unit until the
Country setting screen
§
or the Auto-Setup screen appears.
All the settings except for the ratings level, ratings password and
time settings return to the factory preset. The timer recording
programmes are also cancelled.
§
Only for Australia and N.Z.
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
List of TV Reception Channels
[For]Asia]
[For]Australia]and]N.Z.]
[For]Middle]East]
Change the setting to match the equipment you are connecting with,
or to match the title when there are both PAL and NTSC titles on the
HDD.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others”
and press [ENTER].
3 Press [3, 4] to select “Setup” and
press [ENTER].
4 Press [3, 4] to select “Connection”
and press [1].
5 Press [3, 4] to select “TV System”
and press [ENTER].
6 Press [3, 4] to select the TV system
and press [ENTER].
≥PAL (factory preset)
–Select when connecting to a PAL or Multi-system
television. Titles recorded using NTSC are played as PAL
60.
–Select to record television programmes and PAL input from
other equipment.
–[HDD] Select when playing a PAL input title recorded on the
HDD.
≥NTSC
–Select when connecting to a NTSC television. Television
programmes cannot be recorded properly.
–Select to record NTSC input from other equipment.
–[HDD] Select when playing a NTSC input title recorded on
the HDD.
7 Press [2, 1] to select “Yes” and
press [ENTER].
To return to the previous screen
Press [RETURN].
To exit the screen
Press [RETURN] several times.
∫ To change the setting all at once (PAL!#NTSC)
While stopped, keep pressing [∫] and [< OPEN/CLOSE] on the
main unit for 5 or more seconds.
[Note]
≥This unit cannot record to discs containing both PAL and NTSC
signals. (However, both types of programmes can be recorded
onto the HDD.)
Restart set up
Tuner
System
Channel
Coverage
VHF UHF CATV
PAL–BGH,
SECAM–BG
CCIR E2–E12 E21–E69
S01–S05
M1–M10
U1–U10
S21–S41
PAL–I
Hong
Kong
—21
–
69 —
PAL–DK,
SECAM–DKK1
OIRT R1–R12 21
–
69
44 MHz to
470 MHz
PAL–D China 1–12 13
–
57 Z1
–
Z35
Tuner
System
Channel
Coverage
VHF UHF CATV
PAL–B Australia 0–12 28–69
45 MHz to
470 MHz
PAL–BG
New
Zealand
1–11 21–69
44 MHz to
470 MHz
Tuner
System
Channel
Coverage
VHF UHF CATV
PAL–BGH,
SECAM–BG
CCIR E2–E12 E21–E69
S01–S05
M1–M10
U1–U10
S21–S41
TV System
Setup
TV System
PAL
NTSC
Disc
Picture
Sound
Display
Tuning
Connection
Others
ENTER
RETURN
SELECT
Changing the unit’s settings
EH55.book Page 63 Wednesday, March 29, 2006 9:18 AM