- Depending on your TV and other equipment, there are
various ways you could connect the DVD-Video player.
These are shown below.
- Please refer to your TV, VCR, Stereo System and any other
User Manual(s) as necessary to make the optimal connec-
tions.
Connection to a TV with an A/V Euroconnector socket.
1 Connect the A/V Euroconnector on the rear of the player to
the
corresponding connector on the TV using the cable sup-
plied.
2 Optionally you can also connect the audio Left and Right
channel sockets on the rear of the player to the correspon-
ding sockets on your stereo system.
NOTE
- Do not connect your DVD-player via your VCR, because the
video quality could be distorted by the copy protected sys-
tem.
Connection to a TV with a video (CVBS) socket.
1 Connect the Video socket on the rear of the player to the
corresponding socket on the TV using the cable supplied.
2 Connect the audio Left and Right channel sockets on the
rear of the player to the corresponding sockets on the TV
using the cable supplied. Alternatively, you can use the
same cable to connect the audio Left and Right sockets on
the rear of the player to the corresponding sockets on your
stereo system.
CAUTION
Do not connect the player’s audio output to the phono
input of your stereo system.
2018 161412 10
8
642
1917 151311 9 75 3 1
21
VIDEO
IN
VIDEO CABLE
AUDIO CABLE
AUDIO
IN
TV
EXCELLENT A/V CONNECTION
A/V EUROCONNECTOR CABLE
TV
2018 161412 10
8
642
1917 151311 9 75 3 1
21
HIGHEST QUALITY A/V CONNECTION
GENERAL NOTE
english
9
STANDARD CONNECTIONS