Philips DVD743HC/021 DVD Player User Manual


 
12
English
If you connect to an active subwoofer,
1 Connect the SUBWOOFER AUDIO OUT on
the DVD player to an optional active subwoofer.
2 The subwoofer reproduces the low bass sound
effects (e.g. explosions, the rumble of spaceships,
etc.).
3 Be sure to follow the instructions supplied with
the subwoofer.
Notes:
If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
To see the selected audio format of the
current DVD in the Status Window, press SYSTEM
MENU.
MP3 Audio is not available on the Digital
Output.
Inserting batteries into the
Remote Control
1 Open the battery cover.
2 Insert batteries (AA size) with the correct
polarity as indicated by the + and - symbols
inside the battery compartment.
3 Close the cover.
+
-
+
-
CAUTION!
Remove batteries if they are exhausted
or not to be used for a long time.
Do not use old and new or different
types of batteries in combination.
Batteries contain chemical substances,
so they should be disposed off properly
and kept away from children.
Using the Remote Control
Direct the remote control at the remote sensor
of the DVD player.
Do not drop the remote control.
Do not leave the remote control near extremely
hot or humid place.
Do not spill water or put anything wet on the
remote control.
Preparation