Philips DVD963SA/P01 DVD Player User Manual


 
13
English
Connecting to an Audio System
1 You can also listen to the sound of audio CDs,
stereo SACDs and DVD Video discs by
connecting to an optional stereo system.
2 Connect the FRONT LEFT/RIGHT AUDIO
OUT on the DVD player multichannel audio
output to the Left and Right AUDIO IN on the
stereo system.
Important:
For the best sound quality with
playback of audio CDs and stereo
SACDs, always use the left and right
connectors of the high-quality stereo/
Multi-channel audio output. The separate
stereo output is intended only for
connection to video equipment such as a
TV set.
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
I
AUX/VCR IN
II
TV OUT
FRONT
FRONT
CVBS
VIDEO OUT
AUDIO
OUT
S-VIDEO
Y
Pb/CbPr/Cr
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
MAINS
L
R
Progressive
Interlace
TO VIDEO IN TO SCART IN
OROR
TO VCR
TO S-VIDEO IN
AUDIO SYSTEM
TO AUDIO IN
Connecting to a Multi-channel
Audio/(Video) receiver with 6
connectors
This DVD/SACD player contains a multi-channel
decoder. This enables playback of SACDs &
DVDs recorded in Multi-channel. You only need
to select Multi-channel using the Sound Mode
key.
1 Connect the audio Left and Right outputs for
Front speaker connection (1) to the
corresponding input sockets on your receiver
using the audio cable supplied.
2 Connect the audio outputs for Center speaker
and Subwoofer connection (2) to the
corresponding inputs on your receiver using an
optional audio cable.
3 Connect the audio Left and Right outputs for
Surround speaker connection (3) to the
corresponding inputs on your receiver using an
optional audio cable.
Note:
If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should be
connected directly to the subwoofer.
COAXIAL
OPTICAL
DIGITAL AUDIO OUT
PCM/MPEG2/AC-3/DTS
I
AUX/VCR IN
II
TV OUT
FRONT
FRONT
CVBS
VIDEO OUT
AUDIO
OUT
S-VIDEO
Y
Pb/CbPr/Cr
SURROUND
SURROUND
L
R
CENTER
SUB WF
L
R
1
2
MAINS
L
R
Progressive
Interlace
TO VIDEO IN TO SCART IN
OROR
TO S-VIDEO IN
3
1
2
AMPLIFIER
Preparation