Filter
Top Products
PREPARATION 23
- Black level shift (NTSC only)
Adapts the color dynamics to obtain richer contrasts. Select ON or
OFF.
- Video shift
The factory centers the video on your screen. Use this setting to
personalize the position of the picture on your TV by scrolling it to the
left or right.
- Color settings (For YUV only)
You can select one of five predefined sets of color settings and one
set (Personal) which you can define yourself.
- Personal color (For YUV only)
Allows you to fine-tune the selected color settings saturation,
brightness and contrast.
Sound
- Digital output
Factory setting:ALL.This means that both coaxial and optical outputs
are switched on. If you are not connecting equipment with a digital
input, change the setting to OFF.
If your equipment doesn't include a digital multi-channel decoder, set
the digital output to PCM (Pulse Code Modulation). Both coaxial and
optical outputs are switched on.
- Analog output
Select Stereo, Dolby Surround, 3D Sound or Multi-channel.
- Night Mode
Optimizes the dynamics of the sound with low volume playback.
- Speaker settings
Allows you to select speaker settings, volume balance and delay time
and to test the speaker settings.
Speaker settings are only active on the Analog Multi-Channel Output.
(See appendix)
- Karaoke vocal
Put this setting to ON only when a multi-channel karaoke DVD is
being played.The karaoke channels on the disc will then be mixed to
a normal stereo sound.
Language
Select the required Menu,Audio and Subtitle language. See ‘Initial Setup’.
Audio language and Subtitle language can also be adapted via the Menu
bar on the screen.