Filter
Top Products
English
24
Before Operation (Continued)
VCR Play System
Your video recorder uses triple colour standards, PAL,
MESECAM and SECAM-L. During play your video
recorder should select the colour system automatically,
however if you experience problems you may need to
do it manually.
AV2 Connection
You can connect a decoder, satellite receiver or other
device to the EURO AV2 socket on the back.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the component video jacks for connec-
tion to a TV or monitor that is compatible with a pro-
gressive scan signal, set Progressive Scan to ON.
ote
Progressive Scan will not be set when the VIDEO OUT-
PUT switch is set at RGB position.
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray.
2) Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
Factory Setting
If you need to, you can reset the recorder to all its facto-
ry settings. Select ‘SET’ icon then press ENTER.
ote
Some options can not be reset. (Auto Programming, Clock Set,
Set Password, Movie Rating, Country Code, and Disc Protect)
LANGUAGE
Display Language
Select a language for the Setup menu and on-screen
display.
Disc Language
Select a language for the disc’s Menu, Audio, and Subtitle.
- Original: The original language set for the disc is
selected.
- Other: To select another language, select Other
option then press ENTER. Use the numbered
and ENTER buttons to key-in the correspon-
ding 4-digit number according to the lan-
guage code list on page 56. If you make a
mistake before pressing ENTER, press b
repeatedly to delete one by one and correct
it.
Auto Programming
Program Edit
Clock Set
TV Aspect
PAL
Auto
SECAM
MESECAM
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan
Factory Set
Auto Programming
Program Edit
Clock Set
TV Aspect
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan
Factory Set
Decoder
Satellite Receiver
Other Device
Auto Programming
Program Edit
Clock Set
TV Aspect
SET
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan
Factory Set
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
English
Spanish
French
Italian
Polish
Chinese
Other
- - - -
Original
German
Display Menu
Disc Menu
Disc Audio
Disc Subtitle
Nederlands
English
Deutsch
Italiano
Auto Programming
Program Edit
Clock Set
TV Aspect
OFF
ON
VCR Play Aspect
VCR Play System
AV2 Connection
Progressive Scan
Factory Set