Philips DVP2880 DVD Player User Manual


 
12 EN
[Analogue Output]: Select an audio
format for sound output when this
player is connected through the
AUDIO OUT L/R connectors.
[Digital Audio]: Select an audio format
for sound output when this player is
connected through the COAXIAL
connector.
[Digital Output]: Select a type
of digital output: [Off] - Disable
digital output; [All] - Support
multi-channel audio formats; [PCM
Only] - Downmix to two-channel
audio signal.
[LPCM Output]: Select a LPCM
(Linear Pulse Code Modulation)
output sampling rate. The higher
the sampling rate, the better the
sound quality. [LPCM Output] is
enabled only when [PCM Only] is
selected under [Digital Output].
[HDMI Audio]: Enable or disable
the audio output through HDMI
connection.
[Audio Sync]: Set a delay time for
audio output to match the video play.
[Volume]: Change a volume level.
[Sound Mode]: Select a preset sound
effect.
[Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
Note
Night mode is only available for Dolby encoded DVD
discs.
Preference (languages,
parental control...)
1 Press .
2 Select [Setup] > [Preference] to access
the preference setup options.
[Audio]: Select an audio language for
video.
[Subtitle]: Select a subtitle language for
video.
[Disc Menu]: Select a menu language
for a video disc.
[Parental Control]: Restrict access to
discs that are encoded with ratings.
Input "136900" to access the restriction
options: When the password eld
is highlighted, press OK to enter an
input stage, press
to select a digit
and press / to change a digit
position.
[PBC]: Display or skip the content
menu for VCD and SVCD.
[Password]: Set or change a password
to play a restricted disc. Input "136900"
if you do not have a password or if you
have forgotten your password
[DivX Subtitle]: Select a character set
that supports the subtitle of your DivX
video.
[Version Info]: Display the software
version for this player.
[Default]: Reset all settings to the
factory default, except for the settings
for [Disc Lock], [Parental Control]
and [Password].
Note
If your preferred language is not available for disc
language, audio or subtitle, you can select [Others]
from the menu options and input 4-digit language code
which can be found at the back of this user manual.
The rating levels are country-dependent. To allow all
discs to be played, select [8 Adult].