Filter
Top Products
Philips Electronics Singapore Software Upgrade Instruction
5 Software Filename Verification Procedure
• Open the tray
• Press key 5, 5
Upgrade file name will be displayed on the TV Screen.
6 Download Software
1. Click the link to save the software on your computer.
2. Unzip the .zip file and extract files into your PC.
7 Steps to Upgrade Software
1. Burn the files to blank CD-R or CD-RW, not a DVD, using the following
settings:
• File System CD-ROM ISO Level 2
• Mode 1/2/XA
• Character set ISO 9660
• Finalized, single session
• Write speed slow (e.g. 2x, 4x)
Finalize the disc. (The application may do this automatically.)
NOTE: Packet writing application for drag & drop copying cannot be used
for creating an upgrade disc. Use only a dedicated CD writing application
allowing ‘disc at once’ recording.
No UDF setting as well.
2. Power on the set
3. Put in the disc
4. A message will be displayed on the OSD after the upgrade file is recognized
5. Follow the instruction displayed on the TV Screen – Press “OK” to upgrade
6. After reading the file, the disc will be ejected
7. Remove the disc, but DO NOT close the tray
8. Wait approximately 3-5 minutes for the software to be upgraded
9. The set will restart itself once the upgrade is completed.
Caution: Do not unplug or power off the set while upgrading in
progress.
4 of 5