Filter
Top Products
English
11
Optional: Connecting to a Multi-
channel Receiver
Receiver has a Dolby Digital
decoder
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable not supplied).
3 Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4 Set the DVD Player’s Analog Output to
‘Multichannel’ to enable playback of DVDs
recorded in Multi-channel. (see page 29
“Setting the analogue output”).
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Use the audio cables (white/red) to
connect [AUDIO OUT (L/R)] jacks of the
DVD Player to the corresponding AUDIO
IN jacks on the stereo system (cable
supplied).
Connections
Optional: Connecting to a Stereo
System
MULTICHANNEL AUDIO IN
SUBW.
AV Receiver
REARFRONT
CENTERREARFRONT
LL
RR
AUDIO
IN
STEREO
DIGITAL
01-43_DVP3028_94_eng_RC2 30/06/06, 5:00 PM11