Filter
Top Products
English
11
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Use the audio cables (white/red) to
connect [AUDIO OUT (L/R)] jacks of the
DVD Player to the corresponding AUDIO
IN jacks on the stereo system (cable
supplied).
Connections
Optional: Connecting to a Stereo
System
Optional: Connecting Digital AV
Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1 Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2 Connect the COAXIAL jack of the DVD
player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
3 Set the DVD player’s Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 28
“Digital Output”).
Helpful Hint:
– If the audio format of the Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
AUDIO
IN
STEREO
DIGITAL
OPTICAL
AUDIO
IN
DIGITAL
AV Receiver
01-39_DVP3040K_98_engRC3 02/06/06, 11:03 AM11