Filter
Top Products
English
24 One-Touch Recording
OTR (0:30)
SP
One-Touch Recording (OTR) lets you set a timed recording 30
minutes to 8 hours long of the current TV channel. Before you
begin:
● Place the DVD/VCR in VCR mode. Press VCR so VCR light
appears on the front of the DVD/VCR.
● Select a recording speed (SP, SLP) with SPEED.
● Put a videotape in the cassette compartment. Make sure the
tape’s record tab is intact and the tape is long enough to record
the program(s).
1
Press VCR, then press SKIP
∑∑
/CH
KK
or SKIP
ww
/CH
LL
or the Number buttons to select the channel you want
to record.
2
Press RECORD I repeatedly until the desired
recording length (30 minutes to 8 hours) appears
on the TV screen. Recording will begin.“REC” and “ ”
will appear on the DVD/VCR’s display panel.
Stopping an OTR
To stop an OTR before recording is finished, press STOP C on the
remote control or STOP/EJECT C A (VCR) on the front of the
DVD/VCR.
To cancel the OTR but continue recording, press RECORD I
repeatedly until REC appears in the upper left corner of the TV
screen, and “ ”
disappears.
When an OTR finishes, the DVD/VCR will either switch to DVD
mode or turn itself off. If it changes to DVD mode, press
STANDBY-ON y to turn it off.
After an OTR,“ ” flashes because the VCR is still on standby for
timer recordings. Press TIMER SET on the remote or
STOP/EJECT C A (VCR) on the DVD/VCR to cancel timer
standby and use the VCR normally again.
• The remaining recording time will
appear on the display panel
during an OTR.Press DISPLAY
to see it on the TV screen.
• To change the recording length
while an OTR is in progress,
press RECORD I repeatedly.
• You cannot pause an OTR.
• If the preset time for a timer
recording comes up during an
OTR, the OTR has priority.The
timer recording will not take
place.
• If the end of the tape is reached
during an OTR, the VCR will
stop recording, eject the tape,
and switch to DVD mode or
turn off.
• If one or more Timer
recordings are on standby when
one OTR ends, the DVD/VCR
will turn off automatically and
“
” will appear on the
DVD/VCR's display panel
indicating that it is now ready
for another timer recording.
Helpful Hints
1
2
STANDBY-ON
PLAY
DVD
VCR VCR/TV
OK
MENU MENU
DISC/VCR
RETURN TITLE
A-B
CLEAR/RESET SLOW
SUBTITLE ZOOM
ANGLE
REPEAT REPEAT
AUDIO
SEARCH MODE
DISPLAY
SKIP / CH
SYSTEM
PAUSESTOP
MARKER RECORDTIMER SET
SPEED
1 2 3
7
6
5
4
8
9
0
+10
When an OTR ends
The DVD/VCR will turn off and “ ” on the DVD/VCR's display
panel will flash indicating that the recording is complete, or it may
switch to DVD mode automatically. Press TIMER SET to use the
DVD/VCR as usual.
H9821MD_DFU_EN1_0214 2/14/05 11:14 AM Page 24