Filter
Top Products
8
1 Connect the audio cables (supplied) to:
the • AUDIO OUT FRONT L/R jacks on
this product.
the audio input jacks on the TV.•
Connect USB fl ash drive
1 Connect a USB fl ash drive to the jack on
this product.
Note
This product can only play/view MP3, WMA, WMV, •
DivX (Ultra) or JPEG fi les that are stored on a USB fl ash
drive.
Press the
• button to access the content and play
the fi les.
Connect power
Caution
Risk of product damage! Ensure that the power supply •
voltage corresponds to the voltage printed on the back
of the product.
Before connecting the AC power cord, ensure you have
•
completed all other connections.
Note
The type plate is located on the back of the product.•
1 Connect the AC power cable to the wall
socket.
The product is ready to be set up for use.»
4 Get started
Prepare the remote control
1 Press and push the battery compartment to
slide it open (see “1” in the illustration).
2 Insert two AAA batteries with correct
polarity (+/-) as indicated.
Connect multi channel receiver
1
Connect the audio cables (not supplied) to:
the • AUDIO OUT ( FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) jacks
on this product.
the audio input jacks on the device.•
Connect to digital amplifi er/receiver
1
Connect a coaxial cable (not supplied) to:
the • COAXIAL jack on this product.
the COAXIAL/DIGITAL input jack on •
the device.
Connect analogue stereo system
FRONT R
REAR R
SUBWOOFER
FRONT L
REAR L
CENTER
MULTICHANNEL
AUDIO IN
DIGITAL IN
COAXIAL
DIGITAL
OUT
AUDIO IN
FRONT L
FRONT R
EN