Filter
Top Products
English
18
Finding the correct viewing
channel
A Press STANDBY-ON 2 to turn on
this unit.
B Turn on the TV and switch it to the
correct video-in channel. You should see
the blue DVD background screen.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.
You may press
°
button repeatedly
on your TVs remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
Refer to your TVs user manual on
how to select the correct input on your
TV.
C If you are using external device, (such as
audio system or receiver), turn it on and
select the appropriate input source for
this unit output. Refer to the device
user’s manual for detail.
Getting Started
Setting language preferences
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
On-screen display (OSD) language
You can change the on-screen display
menu language for this unit. The menu
language will remain once you have set it.
A Press SETUP on the remote control.
{ General Setup Page } appears.
B Use keys to select { OSD
Language } in the menu and press .
Disc Lock
OSD Language ENGLISH
Sleep
Lip Sync
Volume
DivX(R) VOD Code
Beharsa Melayu
General Setup Page
C Select a language and press OK to
con rm.
1_dvp6600_98_eng12_Final2.indd 181_dvp6600_98_eng12_Final2.indd 18 2007-08-15 4:34:44 PM2007-08-15 4:34:44 PM