Filter
Top Products
English
15
Step 2: Placing the unit
Before you start....
– Make sure that all cables have been
connected to this unit.
– To prevent this unit from being
scratched, always covers its front surface
with a cloth before you place it at on
any surface.
Option 1: Placing on the table top
A Place this unit on a at surface with the
front panel facing down.
B Place the detachable stand on the rear
panel.
C Slide the stand to the left to lock it into
position.
Option 2: Mounting on the wall
CAUTION!
Risk of personal injury and damage
to the unit. Allow only quali ed
persons to mount the unit.
Note:
Mounting accessories not supplied.
A Mark the wall for screw hole positions
where you intend to mount this unit,
then drill the screw holes.
B Insert the rubber wall plugs and screws
into the holes.
C Hook this unit rmly onto the screws
and lock into position.
Helpful Hint:
– To remove the stand, press and hold the
catch at the extreme right of the rear panel
and push the panel towards the right.
Basic Connections (continued)
To lock stand, slide to left
A
A
C
IR
S
T
A
N
D
B
Y
/
P
L
A
Y
B
B
C
Clean Cloth
1_dvp6620-88_93_eng1_final813.in15 151_dvp6620-88_93_eng1_final813.in15 15 2008-03-24 2:32:29 PM2008-03-24 2:32:29 PM