Filter
Top Products
English
30
Programmed Playback
MP3
CD
Programmed Playback with Audio
CD and MP3/Windows
Media
TM
Audio
Disc
The Program function enables you to store your favorite
tracks from any disc in the player memory.
Program can contain 30 tracks.
1
Press PROGRAM during playback or in the stop
mode to enter the Program Edit mode.
The mark will appear to the right of the word “Program”
on the right side of the menu screen.
Note
Press PROGRAM to exit the Program Edit mode; the
mark will disappear.
2
Select a track, then press OK to place the
selected track on the Program list.
3
Repeat step 2 to place additional tracks on the
Program list.
Audio CD menu MP3/Windows Media
TM
Audio menu
4
Press 2.
The programmed track you selected last is highlighted on the
program list.
5
Use 3/4 to select the track you want to start
playing.
6
Press PLAY B to start.
Playback begins in the order in which you programmed the
tracks.
Playback stops after all of the tracks on the Program list have
played once.
7
To resume normal playback from programmed
playback, then select a track of AUDIO CD (or
MUSIC) list and then press PLAY.
Repeat Programmed Tracks
● To repeat the track currently playing, press REPEAT.
The Repeat icon and “Track” appears on the menu screen.
● To repeat all tracks on the program list, press REPEAT a
second time.
The Repeat icon and “All” appears on the menu screen.
● To cancel Repeat mode, press REPEAT a third time.
Note
If you press T once during Repeat Track playback, the
repeat playback cancels.
Erasing a Track from Program List
1 Press PROGRAM in the stop mode to enter the
Program Edit mode.
2 Press 2 to move to the Program list.
3 Use 3/4 to select the track that you wish to erase from
the Program list.
4 Press CLEAR.
The track will be erased from the Program list.
Erasing the Complete Program List
1 Follow steps 1-2 of “Erasing a Track from Program List” as
above.
2 Use 3/4 to select “Clear All”, then press OK.
The complete Program for the disc will be erased.
The programs are also cleared when the disc is removed.
Maintenance and Service
Refer to the information in this chapter before contacting
a service technician.
Handling the Unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed at
the factory.
Keeping the exterior surfaces clean
• Do not use volatile liquids such as insecticide spray near
the unit.
• Do not leave rubber or plastic products in contact with
the unit for a long period of time since they leave marks
on the surface.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the surfaces are
extremely dirty, use a soft cloth lightly moistened with a
mild detergent solution.
Do not use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the unit.
Maintaining the Unit
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after every
1,000 hours of use.
For details, please contact your nearest authorized service
center.
E
E