Filter
Top Products
38
3139 115 2xxx1
English
Sound and Volume Controls
Individual speakers volume
adjustment
You can adjust the delay times (centre,
rear speakers and subwoofer only) and
volume level for individual speakers.
These adjustments let you optimise the
sound according to your surroundings
and setup.
IMPORTANT!
Press SURR button on the remote
to select Multi-channel surround
mode before adjusting the speaker
settings.
1 Press Ç twice to stop playback (if any),
then press SETUP.
2 Press 2 repeatedly to select { Audio
Setup Page }.
3 Use 34 keys to highlight { Speakers
Volume }, then press 2.
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
Front Left
Front Right
Center
Subwoofer
Rear Left
Rear Right
0dB
0dB
+3dB
+3dB
+3dB
+3dB
Speakers Level Setup
4 Use 1 2 keys to set the volume level for
each speaker (-6dB ~ +6dB).
5 Press OK to confirm.
6 Use 34 keys to highlight { Speakers
Delay }, then press 2.
Audio Setup Page
Speakers Volume
Speakers Delay
Night Mode
CD Upsampling
Center
Rear Left
Rear Right
Speakers Distance Setup
0ms
0ms
0ms
7 Use 1 2 keys to set the delay times for
centre and rear speakers that best suit
your surround sound needs.
8 Press OK to confirm.
Helpful Hints:
– A 1ms increase/decrease of delay time is
equivalent to 30cm change in distance.
– Use the longer delay time settings when
the rear speakers are closer to the listener
than the front speakers.
– The test tone will be automatically
generated to help you judge the sound level
of each speaker.
TIPS: The underlined option is the factory default setting.
To return to the previous menu, press 1. To remove the menu, press SETUP.
001-045-hts3300-01-Eng3 12/9/05, 11:31 AM38