Philips HTS3500K DVD Player User Manual


 
English
43
Selecting surround sound
Press SURR on the remote to select :
MULTI-CHANNEL or STEREO.
The availability of the various surround
sound modes depends on the number of
speakers used and the sound available on
the disc.
The centre and surround speakers
operate only in Multi-channel surround
mode.
The available output modes for Multi-
channel include: Dolby Digital, DTS
(Digital Theatre Systems) Surround and
Dolby Pro Logic II.
Stereo broadcasts or recordings will
produce some surround channel effects
when played in a surround mode.
However, mono (single channel sound)
sources will not produce any sound from
the surround speakers.
Helpful Hint:
You are not able to select the surround
sound mode if the system setup menu is
turned on.
Selecting digital sound effects
Select a preset digital sound effects that
matches your discs content or that
optimises the sound of the musical style
you are playing.
Press SOUND to select the available
sound effect.
When playing movie discs or in TV mode,
you can select :
CONCERT, DRAMA, ACTION or SCI-FI.
When playing music discs or while in
TUNER or AUX/DI mode, you can select :
ROCK, DIGITAL, CLASSIC or JAZZ.
Helpful Hint:
For flat sound output, select CONCERT or
CLASSIC.
Volume control
Adjust VOLUME control (or press
VOL +/- on the remote) to increase
or decrease the volume level.
"VOL MIN" is the minimum volume
level and VOL MAX is the maximum
volume level.
To turn off the volume temporarily
Press MUTE on the remote.
Playback will continue without sound
and "MUTE" appears.
To restore the volume, press MUTE
again, or increase the volume level.
Sound and Volume Controls (continued)
001-049 hts3500-51-Eng 9/14/05, 2:51 PM43