Filter
Top Products
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
A Place the center speaker above or close to the TV.
B Place the subwoofer on the floor, at least one meter
away from the TV.
C Place the front speakers at equal distances from the
TV.
D Place the rear speakers at the back or beside the
listening position.
B
Connect the main unit to TV
DOCK
Pr
COAXIAL
CVBS
S-VIDEO
Pb
Y
VIDEO OUT
VIDEO IN
(CVBS)
VIDEO IN
(CVBS)
z
Connect a composite video cable (supplied) from the
CVBS jack on the main unit to the VIDEO IN jack on
your TV.
Note It is important to connect the main unit
directly to your TV.
2
Set up
A
Finding the viewing channel
A Press 2 (STANDBY ON) on the main unit to turn
it on.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
STANDBY-ON
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel.
B
Select the display language on the
screen
A Press SETUP.
The { General Setup Page } appears.
General Setup Page
Disc Lock
Display Dim
Program
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
English
Melayu
Русский
B Press to select { OSD Language } and press .
C Use keys to select a language option in the
menu and press OK to confirm.
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this Home
Theater system, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this Home Theater
System. Refer to the user manual for more information.
D
Connect the radio antennas
Keep the antennas away from the electronic devices to
prevent unwanted interference.
A
B
A Connect the FM antenna to the inner pin of the
FM 75 jack. For optimum reception, extend the
wire and fix its end to the wall.
B Unfold the AM/MW loop antenna and fix the claw
into the slot. Push the tabs and insert the wires into
the AM/MW jacks.
C Connect the power cable from the main unit to the
AC power outlet.
E
Connect audio output from TV
(optional)
To hear the TV audio through this home theater system,
use a red and white audio cables (not supplied) to
connect the AUDIO IN-TV jacks on the main unit to the
AUDIO OUT jacks on your TV.
AUDIO
OUT
AUDIO IN
AUDIO
OUT
AUDIO OUT
Note Press TV on the remote control to get the
sound output from the speakers system when watching
the TV programs.
Main Unit (rear)
Television
( rear)
Main Unit (rear)
Television
( rear)
FM antenna
AM/MW antenna
SETUP
ไทย
C
Connect the speakers and
subwoofer
Connect the various coloured plugs from the speakers
and subwoofer to the same coloured sockets at the rear
of the main unit.
SPEAKERS
AM/
MW
Main Unit (rear)
Main Unit (rear)
SUBWOOFER
FRONT
RIGHT
FRONT
LEFT
REAR
RIGHT
REAR
LEFT
FRONT CENTRE
FRONT
RIGHT
FRONT
LEFT
CENTER
REAR
RIGHT
REAR
LEFT
SUBWOOFER