Filter
Top Products
1
Connect
A
Placement
Proper speakers system placement is important to
ensure optimum sound performance.
RIGHT
LEFT
A Place the speakers at the normal listening ear level,
equal distance from the TV and face it straight ahead
towards the listening area.
B Place the subwoofer on the floor, at least one metre
away from the TV.
B
Connect to TV
SCART
CVBS OUT
z
Connect the scart converter cable from the CVBS
OUT socket to the SCART socket on your TV.
Note If your TV supports HDMI, connect this unit
to your TV using HDMI connection for better picture
quality. See the accompanying user manual for more
information.
2
Set up
C
Connect audio output from TV (for
EasyLink control)
To hear the TV audio through this DVD Home Theatre
unit, connect an audio cable (supplied) from the
AUX IN sockets to the AUDIO OUT sockets on your
TV.
AUX IN
Note To listen to the audio output from this
connection, press AUX/ MP3 LINK repeatedly until
‘AUX’ is displayed on the display panel.
D
Connect speakers
LEFT
RIGHT
A Connect the left and right speakers to the matching
sockets on the subwoofer.
A
Find the viewing channel
A Press 2 to turn on this DVD Home Theatre unit.
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel.
B
Select on-screen display language
A Press OPTIONS.
[ General Setup ] menu is displayed.
B Press B.
Press OPTIONS to exit menu
General Setup
Screen Saver
DivX(R) VOD Code
Sleep
Display Dim
Disc Lock
OSD Language
English
Deutsch
Dansk
Français
Italiano
Nederlands
Auto
Suomi
C Press V to select [ OSD Language ], then press B.
D Press vV
to select a language option, then press
OK.
E Press OPTIONS to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this DVD
Home Theatre unit, not for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preferences) available on this DVD Home
Theatre unit. Refer to the user manual for more
information.
E
Connect subwoofer and power
cable
C
A
B
A
Connect the interconnect cable between TO MAIN
UNIT socket on the subwoofer and TO
SUBWOOFER socket on this DVD Home Theatre
unit.
B Connect the FM antenna to the inner pin of the FM
75 socket (for some models, it has been
connected in the factory). Extend the wire for
optimum reception.
C Connect the power cable from subwoofer to the AC
power outlet.
F
Attach table stand to DVD Home
Theatre unit
A Attach the table stand to the rear of this unit and
slide it to the left to lock into position.
FM antenna
Main Unit (rear)
Subwoofer (rear)
Main Unit (rear)