Filter
Top Products
14
8 Product
specifications
Note
Specication and design are subject to change •
without notice.
Playback medium
USB storage device
File Format
Audio: .mp3, .wma
•
Picture: .jpg
•
Amplier
Total output power: 300 W RMS
•
Frequency response: 20 Hz-20 kHz / ±3dB
•
Signal-to-noise ratio: > 65 dB (CCIR) /
•
(A-weighted)
Input sensitivity:
•
AUX: 2 V
•
MP3 LINK: 1 V•
Video
Signal system: PAL / NTSC
•
HDMI output 480p, 576p, 720p, 1080i,
•
1080p
Audio
S/PDIF Digital audio input:
•
Coaxial: IEC 60958-3
•
Sampling frequency: •
MP3: 32 kHz, 44.1 kHz, 48 kHz
•
WMA: 44.1 kHz, 48 kHz•
Constant bit rate: •
MP3: 112 kbps - 320 kbps
•
WMA: 48 kbps - 192 kbps•
Radio
Tuning range: FM 87.5-108 MHz (50 kHz)
•
Signal-to-noise ratio: FM 50 dB
•
Frequency response: FM 180 Hz-10 kHz /
•
±6dB
USB
Compatibility: Hi-Speed USB (2.0)
•
Class support: UMS (USB Mass Storage
•
Class)
File system: FAT12, FAT16, FAT32
•
Maximum memory support: < 160GB
•
7 Update software
To check for new updates, compare the current
software version of your home theater with the
latest software version (if available) on the Philips
web site.
Check software version
1 Press SETUP.
2 Select [Preference Setup] > [Version Info.],
then press OK.
The software version is displayed.
»
Update software from a USB
storage device
1 Check for the latest software version on
www.philips.com/support.
Search for your model and click on
•
‘software&drivers’.
2 Download the software onto a USB storage
device.
3 Connect the USB storage device to the
home theater.
4 Follow the instructions on the TV to
conrm the update.
When the update is complete, the home
»
theater automatically switches to standby.
5 Disconnect the power cord for a few
seconds and then reconnect it.
Caution
Do not turn off the power or remove the USB •
storage device when the software update is in
progress because you might damage the home
theater.
EN