Filter
Top Products
19
English
PREPARATIONS
16:9
(Wide screen)
4:3 LB
(Letter Box)
4:3 PS
(Pan Scan)
– TV System
Allows you to select the color system matching the
connected TV set.
AUTO
– If the connected TV is multi system, select this
mode.The output format will be in accordance with the
video signal of the disc.
NTSC
– If the connected TV is NTSC system, select this mode. It
will change the video signal of a PAL disc and output in
NTSC format.
PAL
– If the connected TV is PAL system, select this mode. It
will change the video signal of a NTSC disc and output in
PAL format.
– Video Out
Video out selection enables you to choose the type of
video output suitable for your DVD system.
PR PB Y / SCART
– Select PR PB Y / SCART if you have connected the
video output to your TV using SCART jack. (PR PBY this
function is not available for this model.)
S-VIDEO
– Select S-VIDEO if you have connected the S-VIDEO
output to your TV using S-VIDEO jack.
Note:
–You do not need to adjust the video output setting if you
are using VIDEO jack (yellow) to connect the DVD system to
your TV.
– Screen Saver
If set to ON, when you leave the system in stop or pause
mode for more than five minutes, the screen saver will be
activated. The default setting is ON.
Setting the sound
– Digital Output
Digital output selection enables you to specify the type of
digital output suitable for your amplifier or receiver.
● Select ALL if you have connected the digital output
(COAXIAL or OPTICAL) to a multichannel decoder
receiver.
● Select PCM 96K if the external components is capable of
processing digital signal input with sampling rates of 96 kHz.
● Select PCM 48K if the external components is incapable
of processing 96 kHz digital signal input, then convert to
standard signal with sampling rates of 48 kHz.
● Select OFF to deactivate the digital output (COAXIAL or
OPTICAL).
–Night mode
Set night mode to on to level out the volume. For
example, the disc will play at the same sound level
throughout the movie. The default setting is OFF.
Night function can also be accessed via the
remote control.
Off
Select this when you want to enjoy the surround sound
with its full dynamic range.
On
Select this to level out the volume. High volume outputs
will be softened and low volume outputs are brought
upward to audible level. This feature is only available for
movies with Dolby Digital mode.
– Center Delay
If the listening position is closer to the center speaker than
the front speakers, you can set the center delay time to
improve the surround sound effect.
Options : 5ms, 3ms, 2ms, 1ms or OFF .
– Rear Delay
If the listening position is closer to the rear surround
speakers than the front speakers, you can set the rear delay
time to improve the surround sound effect.
Options : 15ms, 12ms, 9ms, 6ms, 3ms or OFF,.
–Test Tone (DISC mode only)
If set to ON, the system will test the speaker settings. The
test signal is generated through the left, center, right, and
rear (surround) speakers. The default setting is OFF.
Preparations