Filter
Top Products
Activating or deactivating the write
protection (DVD+R, DVD+RW discs
only)
You can prevent a recording on a DVD+RW disc from
accidental erasure by protecting it. However, the protection
can be activated for the entire disc only.An individual
recording cannot be protected. DVD+R discs can be
protected the same way as DVD+RW discs as long as they
are not finalised.
1 Press STOPÇ when playback is stopped or press
DISC MENU on the remote control during playback.
2 Press 3 on the remote control as often as necessary until
you reach the first title of the disc menu.
3 Press 3 again on the remote control.
➜ The disc info screen appears.
4 Press 2 on the remote control.
➜ The menu Settings for appears.
5 Press 4 or 3 on the remote control as often as necessary
to select the line Protection.
6 Press 2 on the remote control to confirm the selection.
7 Press 4 or 3 on the remote control as often as necessary
to select either the line:
Unprotected: for deactivating the write protection
Protected: for activating the write protection
8 Press OK on the remote control to confirm.
9 Press 1 on the remote control to end.
00
To exit the disc info screen press 4 on the remote control.
Making edits compatible (DVD+RW
discs only)
If one title or several titles have been edited (chapter
markers have been inserted or deleted, or chapters have
been hidden) a standard DVD player may still show the
original title.You can prepare your disc in such a way that a
standard DVD player will be able to read the edited title.
1 Press STOPÇ when playback is stopped or press
DISC MENU on the remote control during playback.
2 Press 3 on the remote control as often as necessary until
you reach the first title of the disc menu.
3 Press 3 again on the remote control.
➜ The disc info screen appears.
4 Press 2 on the remote control.
➜ The menu Settings for appears.
5 Press 4 or 3 on the remote control as often as necessary
to select the line Make edits compatible, Press OK.
Note: If your disc is already compatible, Make edits
compatible will not be displayed and a conversion is not
needed.To end press SYSTEM MENU on the remote control.
6 Press OK on the remote control to confirm.
➜ This will take plus the time needed for this process
and Press OK to confirm are displayed.
7 Press OK again on the remote control to start the process.
➜ Working is displayed and the process is started.
➜ A bar moving from left to right indicates the current
status of the converting progress.
00
To exit the disc info screen press 4 on the remote control.
Advanced features
50
English
Settings for My DVD
Disc name My DVD
3
Protection 2 Unprotected
Erase disc
Finalise disc
2
4
Settings for My DVD
Disc name My DVD
Protection Unprotected
Erase disc
3
Make edits compatible Press OK
2