Filter
Top Products
Access control
61
English
Changing the country code
(DVD-Video discs only)
The set filter values depend on the respective country.
Therefore it is necessary to enter the country in which you
live.
1 Switch your TV set on. If necessary set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
2 Press 2 to switch on the DVD recorder system.
3 Press SYSTEM MENU on the remote control.
➜ The system menu bar appears.
4 Press 1 on the remote control as often as necessary until
A is selected.
5 Press 4 or 3 on the remote control as often as necessary
until w Features is selected.
6 Press 2 on the remote control to confirm the selection.
7 Press 2 on the remote control to confirm the selected line
Access control, Enter code….
8 Use the numerical keys on the remote control to enter the
4-digit code.
9 Press 4 or 3 on the remote control as often as necessary
until the line Change country is selected.
10 Press 2 on the remote control to confirm the selection.
11 Press 4 or 3 on the remote control as often as necessary
to select the corresponding country.
12 Press OK on the remote control to confirm the selection.
13 Press SYSTEM MENU on the remote control to switch off
the system menu bar.
Changing the 4-digit code
(DVD-Video discs, (Super) Video
CDs, DVD+R discs, DVD+RW
discs only)
1 Switch your TV set on. If necessary set the TV to the
correct audio/video channel. Such channels may be called
AUX or AUXILIARY IN,AUDIO/VIDEO or A/V IN, EXT1,
EXT2 or EXTERNAL IN, etc.These channels are often near
channel 00.
2 Press 2 to switch on the DVD recorder system.
3 Press SYSTEM MENU on the remote control.
➜ The system menu bar appears.
4 Press 1 on the remote control as often as necessary until
A is selected.
5 Press 4 or 3 on the remote control as often as necessary
until w Features is selected.
6 Press 2 on the remote control to confirm the selection.
7 Press 2 on the remote control to confirm the selected line
Access control, Enter code….
8 Use the numerical keys on the remote control to enter the
old 4-digit code.
9 Press 4 or 3 on the remote control as often as necessary
until the line Change code is selected.
10 Press 2 on the remote control to confirm the selection.
11 Use the numerical keys on the remote control to enter the
new 4-digit code.
12 Enter the same code again as confirmation.
13 Press SYSTEM MENU on the remote control to switch off
the system menu bar.
If you have forgotten your 4-digit code
1 Follow steps 1–7 as described above.
2 Press STOPÇ 4 times when prompted for the
4-digit code.
➜ The old 4-digit code is deleted.
3 Enter a new 4-digit code twice.
A BCDEFG
2 17 off off no off
t
u
ww
x
<
<
1
Child lock
Access control Parental level
Status box Change country
Auto resume Change code
Low power standby
PBC
3
4
2
A BCDEFG
2 17 off off no off
t
u
ww
x
<
<
1
Access control [ ] [ ] [ ] [ ]
Status box Enter code
Auto resume
Low power standby
PBC