Filter
Top Products
18
EN
Switching the status display off or
on
Along with the on screen menu, the status dis-
play also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen.You can
switch off the information about the operating
status so that the status display is not recorded
when copying videocassettes.
1.
1.Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'VCR SET UP' with and
confirm with .
4.
4.Select 'STATUS DISPLAY' with .
5.
5.Select 'ON' or 'OFF' with .
6.
6.To end, press .
Continuous playback
This function can be used to play a cassette
over and over again. When the end of the cas-
sette is reached, the video recorder will rewind
and start from the beginning again. This function
is activated or deactivated as follows.
1.
1.Press .The main menu will appear.
2.
2.Select line 'VCR SET UP' using
and confirm with .
3.
3.Select 'REPEAT PLAY' using .
4.
4.Select function 'ON' with .
If you select 'OFF', continuous playback will be
switched off.
5.
5.To end, press .
6.
6.Insert a cassette.
7.
7.Start the continuous playback with
.
KB
STATUS/EXIT
B1
LCKB
B1
LCKB
MENU
STATUS/EXIT
B1
LCKB
B1
LCKB
MENU
7. Other functions
SELECT KL CHOOSE B
REPEAT PLAY [ON]
→STATUS DISPLAY [ON]
BLUE BACKGROUND[ON]
AUTO STANDBY [OFF]
END=EXIT
Which settings can I choose?
'ON': Shows the status display for a few sec-
onds only.
'OFF': Switches off the status display.
SELECT KL CHOOSE B
→REPEAT PLAY [ON]
STATUS DISPLAY [ON]
BLUE BACKGROUND[ON]
AUTO STANDBY [OFF]
END=EXIT
VR330/07.qx3 02.2.6 10:10 AM Page 18