Philips MCD110 DVD Player User Manual


  Open as PDF
of 21
 
21
As a power-saving feature, the system •
turns off automatically 15 minutes after
disc play reaches the end and no control
is operated.
Audio or subtitle languages cannot be set
The disc is not recorded with sound or •
subtitles in multiple languages.
The audio or subtitle language setting is •
prohibited on the disc.
Cannot display some les in USB device
ThenumberoffoldersorlesintheUSB •
device has exceeded a certain limit. This
phenomenon is not a malfunction.
Theformatsoftheselesarenot •
supported.
USB device not supported
The USB device is incompatible with the •
unit. Try another one.
Black and white or distorted picture
The disc does not match the TV color •
system standard (PAL/NTSC).
Sometimes a slight picture distortion may •
appear. This is not a malfunction.
Clean the disc. •
A distorted picture may appear during •
progressive scan setup.
The aspect ratio of the TV screen cannot be
changed even though you have set the TV
display format.
Theaspectratioifxedontheloaded •
DVD disc.
The aspect ratio may not be changed for •
some TV systems.
No sound or poor sound
Adjust the volume. •
Check that the audio cables (red/white) •
are connected correctly.
Remote control does not work
Before you press any function button, •
rstselectthecorrectsourcewiththe
remote control instead of the main unit.
Reduce the distance between the remote •
control and the unit.
Insert the battery with its polarities (+/– •
signs) aligned as indicated.
Replace the battery. •
Aim the remote control directly at the •
sensor on the front of the unit.
Disc does not play
Insert a readable disc and ensure that the •
label side faces up.
Check the disc type, color system and •
regional code. Check for any scratches or
smudges on the disc.
Press • SYSTEM MENU to exit the system
setup menu.
Disable the password for parental control •
or change the rating level.
Moisture has condensed inside the •
system. Remove the disc and leave the
system turned on for about an hour.
Disconnect and reconnect the AC power
plug, and then turn on the system again.
English
EN
MCD110_94_UM_EN_V1.0.indd 21 10/28/2009 1:40:08 PM
 previous