Philips MCD139/55 DVD Player User Manual


 
English
35
The timer is not working.
The Clock/Timer setting is erased.
The remote control does not function.
Low hum or buzz sound.
Low bass response.
Unable to select Progressive Scan
Troubleshooting
Set the clock correctly.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
Select the correct source (DISC or AUX for
example) before pressing the function button.
Point the remote control at the remote sensor
of the unit.
Reduce the distance to the player.
Remove any possible obstacles.
Replace the battery with new one.
Check that the battery is loaded correctly.
Place the DVD micro system as far away as
possible from electrical devices (such as
speakers, TV) that may be causing interference.
Check all speakers for correct polarity.
Check that the output of the video signal is
switched to 'Ypbpr'.
pg019-pg036-MCD139_55_Eng- 2 4/8/06, 20:2235