Philips MCD183 DVD Player User Manual


 
13
Note
The progressive scan video quality is only available
when a progressive scan TV is connected.
If your TV does not support progressive scan, you
cannot view the picture.
For how to activate progressive scan on your TV, refer
to the TV user manual.
Connect a progressive scan TV through
component video for higher quality video.
1 Connect component video cables (red/
blue/green - not supplied) to:
the VIDEO OUT ( Pr/Cr Pb/Cb Y)
sockets on this unit.
the component input sockets on the
TV.
Option 2: Connect through S-Video
1 Connect an S-video cable (not supplied)
to:
the S-Video socket on this unit.
the S-Video socket on the TV.
S-VIDEO IN
TV
Tip
For optimal reception, fully extend and adjust the
position of the antenna.
For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL jack.
The unit does not support MW radio reception.
1 Connect the supplied FM wire antenna to
the FM AERIAL socket on the unit.
Connect TV
Connect video cables
With this connection, you can watch video from
the unit on the TV screen.
You can select the best video connection that
your TV supports.
Option 1: connect through
component video (for a standard TV
or Progressive Scan TV).
Option 2: connect through S-Video
(for a standard TV).
Option 3: connect through composite
video (CVBS) (for a standard TV).
Option 1: Connect through
component video
Connect a progressive scan TV through
component video for higher quality video.
TV
Pr/Cr Pb/Cb Y
COMPONENT VIDEO IN PUT
English
EN