Philips MCD706 DVD Player User Manual


  Open as PDF
of 4
 
Setting the clock
1
2
3
4
In standby mode, press and hold CLOCK/RDS on the remote.
When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the
remote to set the hours.
Press CLOCK/RDS again and the minute digits flash. Then turn VOLUME-/+ on the
system or press VOL +/- on the remote to set the minutes.
Press CLOCK/RDS again to confirm the time setting.
Setting DVD menu options
IMPORTANT!
If the progressive scan feature is activated but the connected TV does not support
progressive signals or the cables are not connected accordingly, see the user
manual for proper progressive scan setup or deactivate the progressive scan
feature as below:
1) Turn off your TV progressive scan mode or turn on to interlaced mode.
2) Press SYSTEM MENU on the remote to exit the system menu and then DISC
and “1” to exit progressive scan.
Tip
See chapters "Getting Started" and "System Menu Options" in the
User Manual for detailed descriptions.
DIVX (R) VOD
SPDIF SETUP
3D PROCESSING
QUALITY
MCD706 QUG_Eng 2007.6.22, 16:403
 previous