Filter
Top Products
English
31
System Menu Options
Quality
This menu helps you to set the video quality.
1 Press 3 4 to highlight “Quality”.
2 Press 2 or OK to enter Quality Setup.
The options included in Quality Setup page are:
“Sharpness”, “Brightness”, “Contrast”, “Gamma”,
“Hue”, “Saturation” and “Luma Delay”.
Sharpness
Adjusts the sharpness level.
➜ High, Medium and Low.
Brightness
Adjusts the brightness level. Range: -20-+20.
Contrast
Adjusts the contrast level. Range: -16-+16.
Gamma
Adjusts the gamma level.
➜ High, Medium, Low and None.
Hue
Adjusts the hue level. Range: -9-+9.
Saturation
Adjusts the saturation level. Range: -9-+9.
Luma Delay
Adjusts the luma delay.
➜ 0 T and 1 T.
HDMI SETUP
The options included in HDMI Setup Page are:
"HDMI" and "Resolution".
HDMI
This option is used to enable/disable HDMI
output.
➜ ON: Enables HDMI output.
➜ OFF: Disables HDMI output.
Resolution
You can select the resolution of the picture
according to your preference and the connected
HDMI TV.
The resolution options include 480p (720), 720p
(60Hz), 1080i (60Hz), 576p (720), 720p (50Hz)
and 1080i (50Hz).
Notes:
– This option is available only when the "HDMI"
is set to "ON".
– If no display appears on the TV screen due to
unsupported resolution, reconnect any available
interlace video output to your display and re-adjust
the resolution settings to 480p/576p.
Preference Page
The options included in Preference page are: “TV
Type”, “Audio”, “Subtitle”, “Disc Menu”, “Parental”
and “Default”.
TV TYPE
Note:
–Preference features can be selected only during
“No Disc” condition or full STOP mode.