Filter
Top Products
English
xxxxx
13
3 Press ¡1 2™ to select a desired track.
➜ The album number will change accordingly
as you reach the first track of an album by
pressing ¡1 or the last track of an album by
pressing 2™ .
4 Press 2; to start playback.
● During playback, press once ALBUM 4 3 to
show the current album number.
Supported MP3 disc formats:
– ISO9660, Joliet, UDF 1.5
– Maximum title number: 512 (depending on
filename length)
– Maximum album number: 99
– Supported sampling frequencies: 32 kHz,
44.1, kHz, 48 kHz
– Supported Bit-rates: 32~256 (kbps), variable
bitrates
Different play modes: SHUFFLE
and REPEAT
You can select and change the various play
modes before or during playback.
SHUFFLE .........tracks of the entire disc are
played in random order
REPEAT ALL ...repeats the entire disc/
programme
REPEAT............plays the current track
continuously
REPEAT ALB ...repeats all tracks in the current
(for MP3 only) album
1 To select your play mode, press the SHUFF or
REPEAT on the remote control before or
during playback until the display shows the
desired function.
2 Press 2; (on the remote control 2;) to start
playback if in the STOP position.
➜ If you have selected SHUFFLE, playback
starts automatically.
3 To return to normal playback, press SHUFF or
REPEAT on the remote control until the
various SHUFFLE/ REPEAT modes are no
longer displayed.
● You can also press 9 to cancel your play mode.
Notes:
– The SHUFFLE and REPEAT functions cannot be
used simultaneously.
– SHUFFLE play is not available in the programe
mode.
Programming track numbers
Programme in the STOP position to select and
store your disc tracks in the desired sequence. If
you like, store any track more than once. Up to
20 (10 for MP3 disc) tracks can be stored in the
memory.
1 In the stop position, use the ¡1 2™ to select
your desired track number.
● For MP3, you may press ALBUM 4 3 to
select a desired album, then press ¡1 2™ to
select your desired track.
2 Press PROGRAM (or PROG/CLOCK on
the set) to store.
➜ Display: PROG flashes, and
is displayed
briefly, then the selected track number (and the
selected album number for MP3).
3 Repeat steps 1-2 to select and store all
desired tracks.
➜ FULL is displayed if you attempt to
programme more than 20 (10 for MP3 disc)
tracks.
4 To start playback of your disc programme,
press 2;.
Reviewing the programme
● Stop playback and press PROGRAM (or
PROG/CLOCK on the set) repeatedly.
➜ Display first shows a programme sequence,
then the stored track number (and the album
number for MP3).
● To exit review mode, pressÇ.
Erasing the programme
You can erase the programme by:
● pressing 9 once in the STOP mode;
● pressing 9 twice during playback;
● opening the CD compartment;
● Select another sound source.
➜ PROG disappears from the display.
CD/MP3 Operation
pg001-017_MCM118_12_Eng 2006.7.26, 20:5213