Filter
Top Products
10
English
Setting Up your System
Setting the clock
If the display shows an incorrect time or ' --:-- ', the time and
date must be reset manually.
If a TV channel that transmits TXT/PDC (teletext/PDC) is
stored under programme number 'P01', time/date will automat-
ically be taken from the TXT/PDC information.(SMART
CLOCK)
1 Press VCR,then DISC/VCR MENU.
2 Press K/L to select 'INITIAL SET UP' , then press B.
3 Press K/L to select 'CLOCK' , then press B.
4 Check the time in 'TIME'. If
required, please change the time
with numerical key pads.
5 Check 'DAY','MONTH' and 'YEAR'
in the same way.
6 Choose ‘SMART CLOCK’ ON or
OFF with B.
7 To end, press
DISPLAY/STATUS/EXIT.
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
5 Press K/L to select 'MANUAL
TUNING'.Then press B.
6 Press K/L to select 'DECODER'.
7 Press B to select 'ON' (Decoder
switched on).
8 To end, press DISPLAY/STATUS/EXIT.
The decoder has now been allocated to this TV channel.
How can I switch off the decoder?
Use B to select 'OFF' (Decoder switched off).
Decoder allocation (for VCR features)
Some TV channels transmit encoded TV signals which can only
be viewed with a purchased or rented decoder.You can con-
nect such a decoder to this System.The following function will
automatically activate the connected decoder for the desired
TV channel.
1 Switch the TV on. If applicable, select the programme number
for the System operation.
2 Press K/L or numerical key pads to select the TV channel
which you would like to allocate the decoder to.
3 Press DISC/VCR MENU.The main menu will appear.
4 Press K/L to select 'TUNER SET UP'.Then press B.
Sorting and clearing TV channels manually
After you have performed the automatic channel search you
may not agree with the sequence in which the individual TV
channels have been allocated to the programme positions (pro-
gramme numbers) of the System.You can use this function to
individually sort the TV channels already saved or to delete
unwanted TV channels or those with poor reception.
1 Press VCR,then DISC/VCR MENU.
2 Press K/L to select 'TUNER SET
UP' , then press B.
3 Press K/L to select 'MOVE' , then
press B.
4 Press K/L to select the saved TV
channel that you want to change.
5 Confirm with B.
6 Move the selected channel with K/L to the programme num-
ber you want to assign.
7 Confirm with B.
8 To assign other TV channels to a programme number, repeat
steps 4 to 7.
9 Confirm the assignment of the TV channel with MOVE menu.
10 To exit the MOVE menu, press DISPLAY/STATUS/EXIT.
The clock resets automatically
If you save a TV channel that transmits TXT/PDC on programme
number ‘P01’, date and time will constantly be updated.As a result,
time changes, i.e. daylight savings time, will be set automatically.
MOVE
→P01: 02 P06: 90
P02: 03 P07: 99
P03: 05 P08: 121
P04: 10 P09: 124
P05: 74 P10: 130
SELECT
KL CHOOSE B
END=EXIT
Setting the language (for VCR features)
You have the option of setting one of the displayed languages
for the on-screen menu (OSD). However, the System display
will only display English text regardless of this setting.
1 Press VCR,then DISC/VCR MENU.
2 Press K/L to select 'INITIAL SET
UP' , then press B.
3 Press K/L to select 'LANGUAGE',
then press B.
4 Select the desired language with
K/L.
5 To end, press
DISPLAY/STATUS/EXIT.
SELECT KL
FRANÇAIS
→ ENGLISH
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
NEDERLANDS
END=EXIT
MANUAL TUNING
SYSTEM [ L ]
PROG. P55
CHANNEL 055
→DECODER [OFF]
SKIP [OFF]
SELECT
KL CHOOSE B
END=EXIT
Changing the video (colour) system (for
VCR features)
If you playback recordings made on other video recorders or
you want to record from external sources (via the scart sock-
et), the automatic video (colour) system switch-over may lead
to colour distortion. You can switch off the automatic TV sys-
tem switch-over as follows.
1 Press MODE/SYSTEM on the remote control to select the TV
(colour) system with the least disruptions before you start
recording or during playback.
Each pressing MODE/SYSTEM, the display will change cyclicaly;
AUTO,PAL, SECAM, ME-SECAM.
2 After 5 seconds, the OSD will disappear.
AUTO
Video (colour) systems
Other countries, other video (colour) systems:
In central Europe transmissions are broadcast in the PAL system
(Phase Alternation Line) standard. France uses SECAM (Séquentiel
à mémoire).In some countries (USA and Japan),TV viewers
receive their programmes as an NTSC signal (National Television
System Committee).
How can I change back to 'Automatic Switch-over'?
Even if you change the programme number,the video (colour)
system for recording will keep the setting.
If you eject the cassette, the video (colour) system for playback
will switch itself back to 'AUTO' (automatic switchover).
E9017FD_EN.qx3 03.8.6 10:13 AM Page 10