Philips 32PT9005D CRT Television User Manual


 
BLOCK / CLEAR ALL CHANNELS AT THE SAME TIME
A
fter blocking specific channels there may come a time when you want to block or clear all the channels at the
same time. This can be done only after you have entered your access code and the AutoLock features are
displayed on the screen (refer to page 21).
1
Press CURSOR > to select
Block channel. Press the
CURSOR > button to
enter the Block Channel
menu.
2
Press CURSOR < or >
until All Channels
is highlighted. Press
CURSOR > or < to
toggle between Block and
Unblock. If Unblock is
selected, all channels will
be viewable. If Block is
selected, ALL available
channels will be blocked
from viewing.
3
When finished, press
MENU four times to exit
the menu.
1
Press CURSOR > to
select either Clear All or
Block All.
2
If Clear All is set to on, all
channels will be viewable.
If Block All is set to on
all available channels will be
blocked from viewing.
3
When finished, press MENU
on the remote control four
times to exit the menu from
the TV screen.
Follow these steps for Digital Mode
Follow these steps for Analog mode
AutoLock
Block Channel
Block Channel
2 - 1 WCBS - DT
35 - 1 MELCO
59 - 1
All Channels
Unblock
Off
Block All
On
Clear All
VOL CH
MENU OK
MUTE
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP CC INFO
>
>
< >
MENU
Digital Mode
Analog Mode
BLOCK OPTIONS
B
lock Options allows you to block programs by ratings instead of channels. This can be done only after you have
entered your access code and AutoLock feature is displayed on the screen.
Follow these steps for both Digital and Analog Mode
Unrated
No rating
Blocking
VOL CH
MENU OK
MUTE
AUTO
PICTURE
AUTO
SOUND
A/D
FORMAT CLOCK SLEEP GUIDE
POWER
AV SAP CC INFO
Unrated
No rating
Blocking
>
>
< >
MENU
Digital Mode
23
Analog Mode
1
Press CURSOR < or > until you see Block
Options highlighted.
2
Press CURSOR < or > to display the Block
Options (Unrated, No Rating or Blocking) menu.
3
Press CURSOR < or > until you see the
desired Option is highlighted. When highlighted,
each feature can be turned On or Off using
CURSOR > or < on the remote control.
4
When finished, press MENU four times to exit
the menu.
Note : To access this menu for both Digital and Analog Mode, follow the steps for Analog mode (Page 21).
Press A/D button on the remote control to toggle
between Digital and Analog Mode.
HELPFUL HINTS