Filter
Top Products
18
User Manual BDS4241V/BDH4241/BDH5021V
Main Input
Move [- CH +] Select [- VOL +] Exit [MENU]
VIDEO 1
VIDEO 2
VIDEO
S-VIDEO
COMPONENT
RGB
DVI
HDMI 1
HDMI 2
5. BASIC FUNCTIONS
5.1 POWERING ON / OFF
Make sure the monitor is plugged into the wall outlet with the supplied
power cord.
If the power is plugged in, the STATUS LED on the control panel will
illuminate in red color.
Using Front Panel or Remote Control
1. Press the POWER key on the front panel or the remote control.
=> The monitor will now turn on after a brief pause. The STATUS
LED will now turn green to indicate power on status.
2. Turn off the power by pressing the POWER key on the front panel
or the remote control again.
5.2 SELECTING SIGNAL SOURCE
Using Front Panel or Remote Control
1. Press the INPUT key on the from panel or the AV key on the
remote control.
2. Pressing the CH+ or CH- key will cycle the monitor through all
available input signal sources in the following order:
VIDEO1 - VIDEO2 - VIDEO - S-VIDEO - COMPONENT
- RGB - DVI
3. Press the VOL+ or VOL- button to select the source.