Philips CCC 193AT TV VCR Combo User Manual


 
POWER
EJECT
SPEED
MEMORY
123
456
789
0
CH. VOL.
SLEEP/
WAKE UP
ALT.CH
REW
PLAY
F.FWD
REC
/OTR
PAUSE
/STILL
STOP
MUTE
TRACKING
FM
F.ADV
SLOW
MENU
STATUS/EXIT
CLEAR
F.FWD/B Button
When tape playback is stopped, press to fast forward the tape at high
speed. During tape playback, press to fast forward the tape while the
picture stays on the screen. Details are on page 41.
Press to change the setting of a menu item or to go to the next menu.
ALT. CH (Alternate Channel) Button
Press to return to the TV channel you were viewing immediately
before switching to your current channel.
PLAY/
Button
Press to play a tape. Details are on page 28. Press to release Search,
Slow, or Still mode and return to normal playback. Details are on
page 41. Press to select an item in the menu.
SLEEP/WAKE UP Button
Press to set the Sleep Timer. Details are on page 47. Press to set the
Wake Up Timer. Details are on page 48.
SPEED Button
Press to select the recording speed (SP or SLP).
MUTE Button
Press to eliminate the TV/VCRs sound. Press again to return to
the previous volume level.
22 Remote Control Buttons
VOL(ume) o/p Buttons
Press to adjust the sound level. If you press the VOL(ume) o/p
buttons when the sound is muted, the sound will be restored.
POWER Button
Press to turn on or off the TV/VCR.
Number Buttons
Use to select channels and to program TV/VCR functions (such as
setting the clock).
Cable Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 6, press 0,6. If you only press the
Number 6 button, channel 6 will be selected after a brief delay. (There
also may be a brief delay when you select channels 10, 11, and 12.) If
you want to select channels 100 and above, enter channel numbers as a
three-digit number. For example, to select channel 117, press 1, 1, 7.
Antenna Users
Enter channel numbers as a two-digit number for the quickest results.
For example, to select channel 5, press 0,5. If you only press the
Number 5 button, channel 5 will be selected after a brief delay. You may
only select channels 2-69.
CLEAR Button
Press to erase incorrect data when programming TV/VCR func-
tions. Also, press to reset the real-time counter to 0:00:00.
Details are on page 40.
EJECT Button
Press to eject the
tape.