Philips PET1002 DVD Player User Manual


 
TROUBLESHOOTING
Symptom Remedy
Disc can’t be played – Ensure the disc label is upwards.
– Clean the disc.
– Check if the disc is defective by trying
another disc.
The player does not – Aim the remote control directly at the
respond to the remote sensor on the front of the player. Avoid all
control obstacles that may interfere with the signal
path. Inspect or replace the batteries.
Distorted or B/W – Use only discs formatted according to the
picture with DVD TV-set used (PAL/NTSC).
No audio at digital – Check the digital connections.
output – Check the SETUP menu to make sure that
the digital output is set to on.
Player does not respond – Operations are not permitted by the disc.
to all operating – Refer to the instructions in the disc inlay.
commands during
playback
Player feels warm – When the player is in use for a long
period of time, the surface will be heated.
This is normal.
This set complies with the radio interference requirements of the
European Union.