Filter
Top Products
User Guide
5
Installation
How to use the emitters
The dual IR emitters can be attached to the surrounding surface facing the
receiving eyes or directly to the receiving eyes.
1 Attach the emitters to a surface above, below or in front of the
receiving eyes of your devices (for aesthetic appearance or when it is
difficult to locate the receiving eye).
– or –
Attach the emitters directly to the receiving eyes of your devices.
2 Plug the dual IR emitters into the RF Extender.
Note To avoid interference, the wires of the emitters
should be kept away from the RF Extender as far
as possible.
Connecting the Power Adapter
When connecting the power adapter it is recommended
that you plug the adapter into the RF Extender before
you plug it into the socket. When connected you will
see a red LED on the RF Extender.
Note To avoid interference, the adapter cable should be kept away from the
RF Extender as far as possible.
RFX6000 new 24-07-2002 14:04 Pagina 5