Filter
Top Products
RP421- page 6
6
English
TROUBLESHOOTING
If you’re having problems with operating your equipment or if your missing certain functions
on your remote, please check the points listed below:
The remote control does not function
– Check mains power on equipment.
– The batteries may be empty or not installed.
– The TV is produced before 1980 (RC-4).
To control the matchline TXT system on older sets.
– Press and hold ‘Menu’ and ‘3’ simultaneously for 6 seconds. Now you can control
teletext.
To replace the colour keys for older TV sets.
– Press and hold ‘Menu’ and ‘1’ simultaneously for 6 seconds. Now the colour keys
function like those on the original remote control.
To replace all menu (cursor) functions of RC 7535
– Press and hold ‘Menu’ and ‘4’ simultaneously for 6 seconds. Now you can control the
cursor keys like you were used to.
To replace all PIP functions of RC 5992, 5390, 5391, 5392 or 5393:
– Press and hold menu and ‘6’ simultaneously for 6 seconds.
To access directly programs 11 and 12 on some older types of TV:
– Press and hold menu and ‘5’ simultaneously for 6 seconds.
To restore all default settings,
– Press ‘Menu’ and ‘0’ simultaneously for 6 seconds.
Not all functions of my original RC are present on the RP 421.
First, try the secondary functions, see: CONTROLS. If some functions are still missing, you
can program up to 4 TV functions under buttons A, B, C, D. To program the function you
require, look at the code list at the back of this book, and find the 3-digit code for this spe-
cific function.
Press and hold ‘Menu’ and key A, B, C or D simultaneously for at least 3 seconds. Enter the
3-digit code using the keypad. Activate the programmed function by pressing A, B, C or D
together with the sidekey.
Remark: Not all codes are listed on page 41-42. If you require functions that are not listed,
please contact our free-phone helpline (see below). By entering code 199 the ori-
ginal function is restored.
NEED HELP?
If you have questions about your remote or if you are missing certain functions on your
remote, call our free-phone helpline! Before you call, please read the manual carefully.
Most questions will clear themselves.
If your having problems with setting up your VCR, please make a note of your VCR in the
table below this makes it easier for the operators to help you quickly. Look for model num-
bers in the equipment instruction manual, or on the back of the equipment. Be in front of
the equipment, this way our operators can help you verify the functionality of your remote.
In the UK call 0800 968 118
In Ireland 1 800 553 136
The model number of your Philips universal remote control is: SBC RP421
Date of purchase: ____/____/____
Day/month/year
English
Equipment
VCR
Brand
Model nr.
Model number of
original remote Code