Filter
Top Products
INTRODUCTION
Congratulations on your purchase of this Philips SBC RU 252 remote control.
The SBC RU 252 is designed for easy operation of most equipment in the home.
It can replace up to 2 remote controls of almost any brand, for televisions (TV) and
video recorders/DVD (VCR/DVD), even if the original remote control is lost or
broken.
The SBC RU 252 is ready for use with Philips TV, and VCR/DVD equipment.
To operate equipment from other brands, you have to set up the SBC RU 252 by
following 3 easy steps.
If the brand of your equipment is known, follow the procedure described in
chapter: SETTING UP BY CODE ENTRY
If the brand of your equipment is unknown or not in the code list, you can have the
SBC RU 252 do an automatic code search for your equipment.
See chapter SETTING UP BY AUTOSEARCH.
FUNCTIONS OVERVIEW (see diagram)
A Indicator LED
B TV - VCR/DVD Device buttons
C y Power
D Menu To operate menu control
E P+, P- Next / previous programme
TV volume Controls
F a TV Volume louder / softer
G c Mute
Even if you're operating the VCR/DVD, you can directly access the volume of the
TV
with these buttons
H Digits 0..9
I -1/2 digits, 10, 1-
J AV External / source select
K a Teletext on
L I Teletext off
M Shift Shift button
N OK To confirm your selection
O FastText keys / VCR/DVD
red 5 rewind
green 9 stop
blue 6 wind
2 play
yellow ; pause
0 record
Depending on your equipment, some buttons may work differently.
Check the manual of your equipment to know which functions it will operate.
NORMAL OPERATION
1. Press TV or VCR/DVD to select the device you want to operate.
2. Press any of the function buttons to operate that function.
Instructions for use English
4
English
XP SBC RU 252.1 booklet 31-01-2003 11:50 Pagina 4