Filter
Top Products
How to check or change a programmed
recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the =P r or ;P q buttons to select the
programmed recording (TIMER) you wish to check or
change.
c Press the TIMER k button.
d Select the entry field with the QSr or SqP
button.
e Change any displayed information with the =P r or
;P q button or with the 0..9 buttons.
f Confirm with the OK button.
g Make sure that the cassette you have inserted is not
erase protected.
h Switch off using the STANDBY m button.
DThe programmed recording will only function
properly, if the TV-Video Combi has been switched
off using the button STANDBY m .
DIf the TV-Video Combi is turned on a few minutes
before beginning a programmed recording or if is
being used for playback, ’PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes if necessary.
Confirm this message with the button OK ,to
continue the programmed recording session. The
TV-Video Combi switches off during this operation.
Clearing a programmed recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the button =P r or ;P q to select the
programmed recording (TIMER) which you wish to clear.
c Press the CLEAR (CL) button.
The selected programmed recording (TIMER) has now
been deleted.
d To end, press the MENU button.
19