Filter
Top Products
Manual TV channel search
In certain cases the ’Automatic TV channel search’ may not be
able to find all of the TV channels (e.g. coded TV channels). In
that case, use this manual method to set the channels.
a Press the MENU button on the remote control. The main
menu will appear.
b Select the line ’MANUAL SEARCH’ with the =P r or
;P q button and confirm with the SqP button.
MANUAL SEARCH
PROGRAMME NUMBER W P01 X
FREQUENCY 754
DECODER OFF
EXIT: MENU STORE: OK
c In the line ’PROGRAMME NUMBER’, select the function
with the buttons QSr or SqP or use the
number buttons ’ 0..9 ’ on the remote control to select the
desired programme number, e.g.: ’P01’.
d Select the line ’FREQUENCY’ with the menu buttons
=P r or ;P q .
e Enter the frequency of the desired TV channel with the
number buttons 0..9 .
DIf you don’t know the frequency of the desired TV
channel, press SqP in line ’FREQUENCY’to
start the automatic search.
Repeat automatic search until you have found the
desired TV channel. A changing frequency number
will appear on the TV screen.
f If you want to allocate a decoder, in line ’DECODER’
select ’ON’ using the button SqP .
g To store the TV channel, press OK .’STORED’ will
briefly appear on the TV screen.
DIf you would like to search for more TV channels,
start again at step b.
h To end, press the MENU button.
Satellite receiver
You can receive channels from the satellite receiver via the
scart socket EXT .
a To do this, select the channel number ’E1’ using the
button 0 on the remote control. You will have to select
the channels to be received by the satellite receiver on
the receiver itself.
b Use the number buttons 0..9 on the remote control to
select the channels on the TV-Video Combi.
7