Philips S50 CRT Television User Manual


 
9
& Press the cursor right to select Picture.
é Select the menu items in the Picture menu
with the cursor up/down.
Adjust the settings with the cursor left/right or
enter the list of submenu items with the
cursor right. Select a submenu item with the
cursor up/down.
Note:To remove the menu background before
adjusting the picture settings, see Select TV setup,
General, p. 7.
TV menu
Press the MENU key on the remote control to summon the main menu.
Press the i key on the remote control to get information about the selected menu item.
Picture menu
Smart picture
Select
Smart picture to display a list of
predefined picture settings, each corresponding
with specific factory settings.
Personal refers to the personal preference
settings of picture in the picture menu.
Digital options
Pixel Plus is the most ideal setting, doubles the
horizontal resolution and increases the number
of lines with 33%.You may consider to select
Movie Plus in case a halo effect should disturb
you. Dependent on your own preference, select
Double lines, or 100 Hz Digital Scan.
Note:When 60 Hz NTSC material is used, the
options are changed to Pixel Plus, Movie Plus or
Progressive, progressive scan without motion
compensation.
Active Control
The TV continuously measures and corrects all
incoming signals in order to provide the best
picture possible.
& Press the h key on the remote control.
é The Active Control menu appears.
Press the cursor up/down to select the Active
Control values
Off, Minimum, Medium
(recommended) or Maximum.
The picture settings are being optimised
continuously and automatically which is
displayed by bars.The menu items can not be
selected.
Press the cursor right to select Smart
Picture
.
( Press the cursor up/down to select one of the
predefined picture settings.
§ Press the cursor right to select Active
Display
.
è Press the cursor up/down to select Show bars
or Off.
When you select Dynamic contrast, Pixel Plus,
Digital Noise Reduction or Digital Natural
Motion, the TV screen is divided into two parts:
in the left part the selected picture quality
setting is switched off; in the right part it is
switched on.
! Press the h key again to switch off the Active
Control menu.
Picture Sound Features
Smart picture
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic contrast
DNR
Colour enhancement
(Hue)
Picture format
TV
2293.2 gb 15-04-2004 15:38 Pagina 9