Filter
Top Products
Note
- The search time averages about 90 seconds. (Maximum search
time is 5 minutes for TV and 2 minutes for VCR).
- Autosearch stops automatically after all codes have been
tested.
MAKE A NOTE OF YOUR CODE!
Advice
Carefully read the complete procedure before starting!
Note the code inside the battery case and in the codelist of
this booklet. This may be useful if you ever need to set up the
SBC RU220 again. You used the auto search procedure or you
forgot to note the code after set up? No problem! You can still
‘read out’ the code from the remote:
1 Make sure you have selected the right mode with the mode
selector key.
2 Press and release keys 1 and 6 simultaneously.
Important: after pressing the keys, you have to release them
immediately!
– The green LED lights up.
3 Press the
the previous program
key.
– The green LED goes out.
4 Press key 1 and count the number of times the green LED
flashes. This is the first digit of the 3-digit code. (No
flashes means the digit is zero.)
5 Press key 2 and count the number of flashes for the second
digit.
6 Press key 3 and count the number of flashes for the third
digit.
7 Note the code.
Instructions for use
5
English