Filter
Top Products
Adding a function to the remote control
If you want to add a function to the RU520, you can contact the
Philips service line for Universal Remote Control to ask for the 3-figure code
for the extra function.
1 Using the Mode selector,select the device for
which you want to add the function.
2 Then keep 1 and 6 on the RU520 pressed
simultaneously for three seconds, until the
green light under TV in the selector window
flashes twice and then remains lit.
3 Press keys 9, 9 and 4, in that order.
4 Enter the 3-figure code which you received from the service line within
thirty seconds.
5 Press the key under which you want to store the new function.
– The light flashes twice.
The extra function has been successfully added to the RU520.
• If you want to store the function under Shift in combination with
another key, first press the Shift key and then press the required
function key.
• For restoring the original function of the key,
see ‘Restoring the original functions of your remote control’.
Restoring the original functions of your remote
control
1 Keep keys 1 and 6 on the RU520 pressed
simultaneously for three seconds, until the
green light under TV in the selector window
flashes twice and then remains lit.
2 Press keys 9, 8 and 1, in that order.
– The light flashes twice.
All original functions have now been restored
and any extra functions have been deleted.
10
Instructions for use
English
TV VCR/ DV D
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
SHIFT
123
456
78
0
9
M
E
N
U
O
K
SHIFT
123
456
78
0
9
XP SBC RU 520/87.3 06-02-2004 16:25 Pagina 10