Philips SBC RU 530/87U Universal Remote User Manual


 
3. Keys and functions
The illustration on page 3 gives an overview of all keys and their functions.
1 y Standby . . . . . . . . switches TV,VCR or SAT mode on or off.
2 Mode-selector . . . . selects the device you want to operate:
TV,VCR or SAT (satellite/cable).
3 s . . . . . . . . . . . . . . . . mutes the sound of the TV.
4 - VOL +. . . . . . . . . . . adjusts the TV volume.
5 MENU . . . . . . . . . . . turns the menu on and off.
6 Digital keys. . . . . . . direct choice of channels and other functions.
7 SHIFT . . . . . . . . . . . for extra functions.When pressed at the same
time as a second key, the second key will get
another function. For example:
SHIFT + PROG+: . 'menu up'
SHIFT + PROG-:. . 'menu down'
SHIFT + VOL+:. . . 'menu right'
SHIFT + VOL-: . . . 'menu left'
Tr y out other combinations with the Shift-key on your appliance in order to
find out which functions are available.
Only functions featured on the original remote control are available.
8 1 . . . . . . . . . . . . . . . . - red teletext key
- rewind (VCR)
9 9 . . . . . . . . . . . . . . . . - green teletext key
- stop (VCR)
0 0 . . . . . . . . . . . . . . . . tv: P
1
P, previous channel
VCR: record
SAT: A/B
! ;. . . . . . . . . . . . . . . . . - yellow teletext key
- pause (VCR)
@ 6. . . . . . . . . . . . . . . . - blue teletext key
- wind (VCR)
# 2 . . . . . . . . . . . . . . . . - white teletext key
- index
- play (VCR)
$ / . . . . . . . . . . . . . . . . selects between one- and two-figure channel
numbers.
% OK. . . . . . . . . . . . . . . confirms your selection.
^ - PROG + . . . . . . . . selects a previous or following channel.
& AV . . . . . . . . . . . . . . . switches between external inputs of your
equipment.
* . . . . . . . . TV: teletext keys
SAT: teletext, Info, Guide, Subtitle
VCR: timer, Showview
If you use the () 'memory off' key to get to the next teletext page on your
Philips TV, you can press the Subtitle key for this. See also ‘Troubleshooting’.
If the device does not respond at all, or not to all of the key
commands, follow the instructions under ‘Setting the remote
control’. It is possible that you must enter another code for the
device.
8
Instructions for use
English
XP SBC RU 530/87.3 09-02-2004 15:31 Pagina 8