Filter
Top Products
8
Tip
For best reception, point the antenna in the •
direction of the transmitter.
Set up a digital tuner with this
antenna
You can install available channels with the digital
TV tuner. This automatic process is part of the
setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive
viewable channels.
There are two ways to connect the antenna to
the TV:
Connect the antenna to a digital tuner. •
If the signal strength is good enough, the
channels can be memorized in the tuner
automatically .
Connect the antenna directly to the TV. •
Tunetotheanaloguechannelsandnd
the best antenna location. Then re-
connect the antenna to the digital tuner.
Ensure the signal strength is good enough
before you install the channels with the
tuner.
-or-
4 Set up
SDV1225T/27
For VHF reception
1
Extend the telescopic dipoles to the
longest possible length.
2 Turn the TV to the desired channel. Move
the dipoles in different directions up and
down until the reception is achieved.
For UHF reception
1
Turn the TV to the desired channel.
PointtheUHFreectortowardsthe
transmitter until reception is achieved.
EN