Philips SDV5119/27 TV Antenna User Manual


 
6
Note
Ensure the antenna at is set against its base on a
horizontal surface.
4 Set up SDV5119
For VHF reception
1
Extend the VHF rod antenna to the
longest possible length.
3 Get started
To ensure the antenna to work properly, read
the user manual of your television before you
start. Set the television so that it receives the
signal from an ANTENNA instead of CABLE or
SATELLITE.
Installation
Determine the signal strength
Before Installation, determine the best
location for optimum reception. It is important
for the antenna to have an unobstructed path
to the transmitter. For best results, ensure the
antenna faces the location of the transmitter.
Note
Choose a location near a window which gives the
antenna a clear view of the transmitter.
Note
Place the antenna away from the metal surface to
avoid interference.
Connect to the TV
1 One end of the coaxial cable is already
connected to the signal output of the
antenna.
2 Connect the other end to the input on
the TV receiver.
EN