Philips SDV7120 TV Antenna User Manual


 
6
2 Connect the other end of the built-in
coaxial cable to the input on the TV
receiver.
3 Connect the DC plug to the antenna and
the power supply to a 120V AC outlet.
4 Turn the power switch on.
The blue LED is lit. »
3 Get started
To ensure the antenna to work properly, read
the user manual of your television before you
start. Set the television so that it receives the
signal from an ANTENNA instead of CABLE or
SATELLITE.
Installation
Determine the signal strength
Before Installation, determine the best
location for optimum reception. It is important
for the antenna to have an unobstructed path
to the transmitter. For best results, ensure the
antenna faces the location of the transmitter.
Note
Choose a location near a window which gives the
antenna a clear view of the transmitter.
Note
Place the antenna away from the metal surface to
avoid interference.
Connect to the TV
1 Assemble the antenna base to the UHF
log periodic antenna.
EN