Filter
Top Products
8
EN
Troubleshooting
Problem Tip
No image or wrong
image on TV3
• Make sure SCART cables are
firmly inserted.
• Make sure the receiver (A) is
connected to TV3.
• Make sure both receiver (A) and
transmitter are switched on.
• Make sure the video source is
switched on.
• Make sure the correct SCART
input on TV3 is selected.
• Select the correct video source
with +/- on the receiver (A).
> In combination with the
SLV5400 transmitter.
• If the video source gives proper
image on TV1:
Make sure the video source gives
video signal in CVBS mode. See
its user manual
• Change the wireless channel that
is used for communication. See
page 6.
• The receiver (A) is out of range
of the transmitter. The number
of walls and ceilings in between
the receiver (A) and transmitter
restrict the distance.
Interference in the
image on TV3
•
Slightly change the position of the
receiver (A) or the transmitter.
• Change the wireless channel that
is used for communication. See
page 6.
• The receiver (A) is out of range
of the transmitter. The number
of walls and ceilings in between
the receiver (A) and transmitter
restrict the distance.