Philips SRP1101/10 Universal Remote User Manual


  Open as PDF
of 12
 
6 EN 7EN
Afterinitialsetup
1 MakesuretheTVisswitchedon.
2 Keepbuttons
and
pressedsimultaneouslyfor
5seconds.
• ThegreenSetuplight
lightsup.Theremote
controlisnowinsetup
mode.
3
Pressandholdthebuttonthatdoesnotfunctionand
immediatelyreleaseitwhentheTVresponds.
• Ifthebuttonstilldoesnotfunctionasexpected,try
pressingitagainforalongerperiodoftime.
4
Keepbuttons and
pressedsimultaneouslyfor5
seconds
tosaveyoursettings
andexitsetupmode.
•
Whennobuttonis
pressedfor5minutes
ormore,theremotecontrolwillexitsetupmode,
automaticallysavingallyoursettings.
3 Usingtheuniversalremote
control
3.1 Buttonsandfunctions
Theillustrationonpage2givesanoverviewofallbuttons
ontheremotecontrol.Tryoutthebuttonsthatyouneed
foroperatingyourTV.
Notes
• Buttonshavingthesamefunctionsasthebuttons
onyouroriginalremotecontrolmayhavedifferent
namingsontheSRP1101.
• Onlyfunctionsthatareavailableonyouroriginal
remotecontrolcanbeusedforoperatingyourTV
withtheSRP1101.
1
................................... setuplight.
Lightsupwhenaremote
controlcommandisbeingsentand
whentheremotecontrolisinsetup
mode
.
................................. switchestheTVon/off.
Note
ForsomeTVbrands/types,the
buttonwillonlyswitch
offtheTV.Youwillhavetopressadigitbutton(direct
channelselection)toswitchontheTVagain.
2
....................... teletexton( )/off( ).
................................. selectsbetweenregular(4:3)and
widescreen(16:9)TV.
................................mutesTVsound.
3
...................
previous/nextchannel.
...................
adjustTVvolume.
4 .............. digitbuttonsfordirectchannel/track
selection.
5
.................................switchesbetweenexternal(Audio/
Video)inputsofyourTV.
6
.................................selectsbetweenoneandtwo-figure
channelnumbersandchannel
numberswithmorethantwoor
threefigures.
3.2 Resettingabuttontoitsoriginalfunction
Ifanimprovedbutton(seechapter2.2.1)stilldoesnot
functionasexpected,youcanalwaysresetthebuttontoits
originalfunction.
1
Keepbuttons and
pressedsimultaneouslyfor5
seconds,
untilthegreen
Setuplight
lightsup.
• Theremotecontrolis
nowinsetupmode.
2
Pressdigitbuttons ,
and ,
inthatorder.
• Aftereachbuttonpress
thegreenSetuplight
blinksonce.
Usingtheuniversalremotecontrol English
5sec.
5sec.
5sec.
 previous next